Compaq dx7500 Service Reference Guide: HP Compaq dx7500 Business PC - Page 14
Computer Setup—Main - bios
View all Compaq dx7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc. CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen. Computer Setup-Main NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 2-1 Computer Setup-Main Option Description System Time Allows you to set system time. System Date Allows you to set system date. Language Allows you to select language. Floppy Diskette A: Allows you to set drive A to: ● Disabled ● 1.44 MB 3.5" ● Not Installed 1st Drive 2nd Drive 3rd Drive (not used) 4th Drive (not used) 5th Drive 6th Drive For each, allows you to: ● (view only) ◦ Capacity (Size - HDD only) ◦ Transfer Mode ● Smart Support - run HDD self-test for selected channel: ◦ SMART Status Check ◦ SMART Short Self-Test ◦ SMART Extended Self-Test System Information (view only) ● Installed Memory ● Memory Bank 1 ● Memory Bank 2 ● Memory Bank 3 ● Memory Bank 4 ● BIOS Revision ● Core Version ● Model Number 4 Chapter 2 Computer Setup (F10) Utility