Compaq dx7500 Service Reference Guide: HP Compaq dx7500 Business PC - Page 58
Access Panel - mt
![]() |
View all Compaq dx7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Access Panel 1. Prepare the computer for disassembly (Preparation for Disassembly on page 47). 2. Remove the screw (1) that secures the access panel to the computer chassis. 3. Slide the access panel back (2) about 1.3 cm (1/2 inch), then lift it off the unit. NOTE: You may want to lay the computer on its side to install internal parts. Be sure the side with the access panel is facing up. Figure 7-2 Removing the Computer Access Panel To replace the access panel, reverse the removal steps. 48 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
![](/manual_guide/products/compaq-dx7500-service-reference-guide-hp-compaq-dx7500-business-pc-72345e2/58.png)
Access Panel
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
47
).
2.
Remove the screw
(1)
that secures the access panel to the computer chassis.
3.
Slide the access panel back
(2)
about 1.3 cm (1/2 inch), then lift it off the unit.
NOTE:
You may want to lay the computer on its side to install internal parts. Be sure the side
with the access panel is facing up.
Figure 7-2
Removing the Computer Access Panel
To replace the access panel, reverse the removal steps.
48
Chapter 7
Removal and Replacement Procedures Microtower (MT) Chassis