Compaq dx7500 Service Reference Guide: HP Compaq dx7500 Business PC - Page 94
System Board
View all Compaq dx7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
6. Press the release latch on the chassis base, and then lift up the rear of the power supply to disengage it from the chassis. 7. Slide the power supply toward the front/bottom of the computer, then lift the power supply out of the computer. To install the power supply, reverse the removal procedure. System Board When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Memory modules ● Processor 1. Prepare the computer for disassembly (Preparation for Disassembly on page 47). 2. Remove the access panel (Access Panel on page 48). 3. Lay the computer on its side with the rear facing toward you. 4. Remove the front bezel (Front Bezel on page 49). 5. Remove an expansion cards (Expansion Cards on page 55). 6. Disconnect the power, and data cables from the back of all installed drives. 7. Disconnect all cables from the system board. 8. Remove the eight screws that secure the system board to the chassis. 84 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis