Compaq dx7500 Service Reference Guide: HP Compaq dx7500 Business PC - Page 91
Heatsink assembly
View all Compaq dx7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Heatsink assembly 1. Prepare the computer for disassembly (Preparation for Disassembly on page 47). 2. Remove the access panel (Access Panel on page 48). 3. Lay the computer on its side with the rear facing toward you. 4. Disconnect the heatsink fan control cable from the system board. 5. Loosen the four captive screws that secure the heatsink to the system board. 6. Lift the heatsink from the processor and set it on its side to keep from contaminating the work area with thermal grease. CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly seat the heatsink to the processor. This is especially important as the pins on the socket are very fragile and any damage to them may require replacing the system board. When reinstalling an existing heatsink, make sure that its bottom has been cleaned with an alcohol wipe and fresh thermal grease has been applied to the top of the processor. New heatsinks come from the factory with fresh thermal grease already applied. Heatsink assembly 81