CyberPower PDU41102 User Manual 2 - Page 102
snmpv3 index 1 authkey test_authkey_123456
View all CyberPower PDU41102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Commad Line Interface password as test_authkey_123456 CyberPower > snmpv3 index 2 auth md5 authkey test_authkey_123456 Example 6: To change the authentication password of first SNMPv3 user to test_authkey_123456 CyberPower > snmpv3 index 1 authkey test_authkey_123456 Example 7: To change the authentication protocol of third SNMPv3 user to none CyberPower > snmpv3 index 3 auth none Example 8: To change the privacy protocol of second SNMPv3 user to aes and set its privacy password as test_privkey_123456 CyberPower > snmpv3 index 2 priv aes privkey test_privkey_123456 Example 9: To change the privacy password of first SNMPv3 user to test_privkey_123456 CyberPower > snmpv3 index 1 privkey test_privkey_123456 Example 10: To change the privacy protocol of third SNMPv3 user to none CyberPower > snmpv3 index 3 priv none Enter the following command to perform all parameters configuration with a single command: snmpv3 set For example:. CyberPower > snmpv3 set 1 CyberPower 192.168.203.90 sha test_authkey_123456 des test_privkey_123456 trap Description: Show and configure information of SNMP trap receiver. Option show add index name ip Argument 1 | 2 | ... | 10 Description Display trap receiver information. Add trap receiver. Select trap receiver index. Modify trap name of trap receiver. Modify IP address of trap receiver. Intelligent PDU User Guide 100