CyberPower PDU41102 User Manual 2 - Page 48

Enable/Disable the AutoPing function.

Get CyberPower PDU41102 PDF manuals and user guides View all CyberPower PDU41102 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Web Interface Up to 10 AutoPing settings are allowed. Item Active Definition Enable/Disable the AutoPing function. Priority IP Address Target IP Address When "Yes" is selected, sets the IP address of the priority to utilize the function. Pings will only be sent to the target device when receiving a successful ping response from the priority. For example, the target device is connected to a router, which is set to be the priority. The PDU sends IP pings to the target device only if the router is responsive to IP pings. In this way, the PDU can verify network connection by sending IP pings to the priority first and determine if target IP ping test is performed accordingly. The IP address of the target device. Period Retries Action Restart Delay The time interval between successive pings to the target device, in second. The number of failed ping tests that must be consecutively detected before the action is triggered. The action on specific outlet if the PDU continuously receives no response from the target device. When "Reboot" is selected, sets the maximum number of times to be triggered. Length of time after an action is triggered before beginning to restart ping tests. This allows a proper time for the device to get back to normal operation. During this time interval, no pings are sent to the target device. Intelligent PDU User Guide 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
46
Web Interface
Intelligent PDU User Guide
Up to 10 AutoPing settings are allowed.
Item
Definition
Active
Enable/Disable the AutoPing function.
Priority IP Address
When “Yes” is selected, sets the IP address of the priority to utilize the
function. Pings will only be sent to the target device when receiving a
successful ping response from the priority. For example, the target
device is connected to a router, which is set to be the priority. The PDU
sends IP pings to the target device only if the router is responsive to IP
pings. In this way, the PDU can verify network connection by sending IP
pings to the priority first and determine if target IP ping test is performed
accordingly.
Target IP Address
The IP address of the target device.
Period
The time interval between successive pings to the target device, in
second.
Retries
The number of failed ping tests that must be consecutively detected
before the action is triggered.
Action
The action on specific outlet if the PDU continuously receives no
response from the target device. When “Reboot“ is selected, sets the
maximum number of times to be triggered.
Restart Delay
Length of time after an action is triggered before beginning to restart
ping tests. This allows a proper time for the device to get back to normal
operation. During this time interval, no pings are sent to the target
device.