CyberPower PDU41102 User Manual 2 - Page 84
menumode, Command Response Codes
View all CyberPower PDU41102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Commad Line Interface client program (eg. PuTTY, HyperTerminal, or Tera Term) on your computer. Note: If using PuTTY to configure SSH access, please configure Line discipline of Terminal to "Force off", as shown in Figure 5. Figure 5. The PuTTY Configuration window. How to use the Command Line Interface While using the command line interface, you can also do the following: 1. To close the connection to the command line interface Type "exit" and press Enter 2. To switch mode as Menu Mode Type "menumode" and press Enter 3. To view a list of available commands or arguments Type "?" (Eg. date ?). 4. To view the command that was typed most recently in the session Press the UP/DOWN arrow key. (The session can remember up to ten previous commands.) 5. A command can support multiple options To define the date as March 21, 2015 (Eg. date yyyy 2015 mm 3 dd 21) Command Response Codes When the command or arguments is not recognized or is incorrect, the console interface will display [^] underneath the wrong command or argument. The following error message will be displayed: Command not found PDU doesn't know this command. Console interface display the list of available commands. Parameter Error The parameter type or format is not allowed. Console interface display the list of available value or format. Intelligent PDU User Guide 82