D-Link 3250TG Product Manual - Page 106
SNMP Community Table Configuration window, Parameter, Description
UPC - 790069250682
View all D-Link 3250TG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
D-Link DES-3250TG Standalone Layer 2 Switch Figure 6- 64. SNMP Community Table Configuration window To delete an existing entry, click the selection button in the Delete column on the far right that corresponds to the port you want to configure. To create a new entry, configure the parameters as desired in the top part of the window above and click the Apply button. This will add the new string to the SNMP Community Table. Configure the following for the new SNMP Community entry: Parameter Description Community Name View Name Type an alphanumeric string of up to 32 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the switch's SNMP agent. Type an alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the switch. The view name must exist in the SNMP View Table. Access Right Use the pull-down menu to select the access right: Read_Only − Specifies that SNMP community members using the community string created with this command can only read the contents of the MIBs on the switch. Read_Write − Specifies that SNMP community members using the community string created with this command can read from and write to the contents of the MIBs on the switch. 98