D-Link 3250TG Product Manual - Page 14
Power - how to reset des
UPC - 790069250682
View all D-Link 3250TG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
D-Link DES-3250TG Standalone Layer 2 Switch Power on The DES-3250TG switch can be used with AC power supply 100 - 240 VAC, 50 - 60 Hz. The power switch is located at the rear of the unit adjacent to the AC power connector and the system fan. The switch's power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected. After the power switch is turned on, the LED indicators should respond as follows: • All LED indicators will momentarily blink. This blinking of the LED indicators represents a reset of the system • The power LED indicator is always on after the power is turned ON • The console LED indicator will blink while the Switch loads onboard software and performs a self-test. It will remain ON if there is a connection at the RS-232 port, otherwise this LED indicator is OFF Power Failure As a precaution in the event of a power failure, unplug the switch. When the power supply is restored, plug the switch back in. 6