D-Link 3250TG Product Manual - Page 66

Forwarding Filtering

Get D-Link 3250TG - Switch PDF manuals and user guides
UPC - 790069250682
View all D-Link 3250TG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

D-Link DES-3250TG Standalone Layer 2 Switch P2P edge port normally should not receive BPDU packets. If a BPDU packet is received it automatically loses edge port status. No indicates the port does not have edge port status. Select Yes or No. Choosing Yes indicates a point-to-point (p2p) shared link. These are similar to edge ports, however they are restricted in that a p2p port must operate in full duplex. Like edge ports, p2p ports transition to a forwarding state rapidly thus benefiting from RSTP. Forwarding Filtering MAC addresses can be statically entered into the switch's MAC Address Forwarding Table. These addresses will never age out. Unicast Forwarding To enter a MAC address into the switch's forwarding table, click on the Forwarding Filtering folder on the Configuration menu and then click Unicast Forwarding: Figure 6- 21. Setup Static Unicast Forwarding Table window The following fields can be set: Parameter VLAN ID MAC Address Description Allows the entry of the VLAN ID of the VLAN the MAC address below is a member of − when editing. Displays the VLAN ID the currently selected MAC address is a member of − when editing an existing entry. Allows the entry of the MAC address of an end station that will be entered into the switch's static forwarding table when adding a new entry. 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
D-Link DES-3250TG Standalone Layer 2 Switch
edge
port
normally
should
not
receive BPDU packets. If a BPDU
packet is received it automatically
loses edge port status.
No
indicates
the port does not have edge port
status.
P2P
<No>
Select
Yes
or
No
. Choosing
Yes
indicates
a
point-to-point
(p2p)
shared link. These are similar to
edge
ports,
however
they
are
restricted in that a p2p port must
operate in full duplex. Like edge
ports, p2p ports transition to a
forwarding
state
rapidly
thus
benefiting from RSTP.
Forwarding Filtering
MAC addresses can be statically entered into the switch’s MAC Address Forwarding Table. These
addresses will never age out.
Unicast Forwarding
To enter a MAC address into the switch’s forwarding table, click on the Forwarding Filtering
folder on the Configuration menu and then click Unicast Forwarding
:
Figure 6- 21.
Setup Static Unicast Forwarding Table window
The following fields can be set:
Parameter
Description
VLAN ID
Allows the entry of the VLAN ID of the
VLAN the MAC address below is a
member of
−
when editing. Displays
the VLAN ID the currently selected
MAC address is a member of
−
when
editing an existing entry.
MAC Address
Allows the entry of the MAC address
of an end station that will be entered
into the switch’s static forwarding
table when adding a new entry.
58