D-Link 3250TG Product Manual - Page 52
Advanced Settings
![]() |
UPC - 790069250682
View all D-Link 3250TG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
D-Link DES-3250TG Standalone Layer 2 Switch You can also enter the name of the System, its location, and the name and telephone number of the System Administrator. It is recommended that the person responsible for the maintenance of the network system that this switch is installed on be listed here. Advanced Settings Click Advanced Settings on the Configuration menu: Figure 6- 10. Switch Information (Advanced Settings) window The following fields can be set: Parameter Description serial_port auto Set the age out timer for the serial port logout time minutes, or Never. MAC Address Aging Time The MAC Address Aging Time specifies the length of time a learned MAC Address will remain in the forwarding table without being accessed (that is, how long a learned MAC Address is allowed to remain idle). The Aging Time can be set to any value between 10 and 1,000,000 seconds. IGMP Snooping IGMP Snooping allows the switch to read the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the switch. It can be enabled globally by toggling Disabled to Enabled. GVRP Status To enable GVRP on the switch globally, toggle Disabled to Enabled. Telnet Status The Switch can be accessed using 44
![](/manual_guide/products/dlink-des3250tg-product-manual-6f58f05/52.png)