D-Link 3250TG Product Manual - Page 45
Admin and User Privileges - des reset
![]() |
UPC - 790069250682
View all D-Link 3250TG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
D-Link DES-3250TG Standalone Layer 2 Switch 4. Please remember that Apply makes changes to the switch configuration for the current session only. All changes (including User additions or updates) must be entered into non-volatile ram using the Save Changes command on the Main Menu - if you want these changes to be permanent. Admin and User Privileges There are two levels of user privileges: Admin and User. Some menu selections available to users with Admin privileges may not be available to those with User privileges. The following table summarizes the Admin and User privileges: Switch Configuration Management Configuration Network Monitoring Community Strings and Trap Stations Update Firmware and Configuration Files System Utilities Factory Reset Reboot Switch Privilege Admin Yes Yes Yes Yes Yes Yes Yes User Account Management User Read Only Read Only Read Only Read Only Ping Only No No Add/Update/Delete User Accounts Yes No View User Accounts Yes No Table 6-1. Admin and User Privileges After establishing a User Account with Admin-level privileges, go to the Maintenance menu and click Save Changes. Next click Save Configuration. The switch will now save any changes to its non-volatile ram and reboot. You can logon again and are now ready to continue configuring the Switch. Save Changes The DES-3250TG has two levels of memory; normal RAM and non-volatile or NV-RAM. Configuration changes are made effective by clicking the Apply button. When this is done, the settings will be immediately applied to the switching software in RAM, and will immediately take effect. Some settings, though, require you to restart the switch before they will take effect. Restarting the switch erases all settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is necessary to save all setting changes to NV-RAM before rebooting the switch. To retain any configuration changes permanently, click Save Changes from the Maintenance menu. The following window will appear: Figure 6- 4. Save Configuration window 37
![](/manual_guide/products/dlink-des3250tg-product-manual-6f58f05/45.png)