D-Link DSS-200G-28MP Product Manual - Page 102
Reboot System, Tools > Reboot System
View all D-Link DSS-200G-28MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
D-Link DSS-200G MP/MPP series Switch User Manual Figure 4-51 Reset window Select The Switch will be reset to its factory defaults including IP address and stacking information, and then will save and reboot option to reset the switch's configuration to its factory default settings. Select The Switch will be reset to its factory defaults except IP address, and then will save and reboot option to reset the switch's configuration to its factory default settings. This option will exclude the IP address from being changed. Select The Switch will be reset to its factory defaults including IP address option to reset the switch's configuration to its factory default settings. Click the Apply button to initiate the factory default reset and reboot the switch. NOTE: Performing a factory reset in one version of the interface (Standard Mode or Surveillance Mode) will cause settings to be reset in the other version of the interface. Reboot System This window is used to reboot the switch and alternatively save the configuration before doing so. To view the following window, click Tools > Reboot System, as shown below: Figure 4-80 Reboot System window When rebooting the switch, any configuration changes that was made during this session, will be lost unless you select the Yes option when asked to save the settings. Click the Reboot button to alternatively save the settings and reboot the switch. Figure 4-81 Reboot System - Rebooting window 97