D-Link DSS-200G-28MP Product Manual - Page 55
MAC Address Table Settings, From Port / To Port, MAC Address, Apply, Delete All, Delete
View all D-Link DSS-200G-28MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
D-Link DSS-200G MP/MPP series Switch User Manual Figure 4-30 Multicast Static FDB window The fields that can be configured are described below: Parameter From Port / To Port VID MAC Address Description Select the appropriate port range used for the configuration here. Enter the VLAN ID of the VLAN the corresponding MAC address belongs to. Enter the static destination MAC address of the multicast packets. This must be a multicast MAC address. The format of the destination MAC address is 01-00-5E-XX-XX-XX. Click the Apply button to accept the changes made. Click the Delete All button to remove all the entries. Click the Delete button to remove the specific entry. MAC Address Table Settings This window is used to view and configure the MAC address table's global settings. To view the following window, click L2 Features > FDB > MAC Address Table Settings, as shown below: Figure 4-31 MAC Address Table Settings (Global Settings) window The fields that can be configured are described below: Parameter Aging Time (0,10-1000000) Description Enter the MAC address table's aging time value here. This value must be between 0 or 10 to 1000000 seconds. By default, this value is 300 seconds. Click the Apply button to accept the changes made. After clicking the MAC Address Learning tab, at the top of the page, the following page will be available. 50