D-Link DSS-200G-28MP Product Manual - Page 96
Save and Tools, Save Configuration, Firmware Information, Firmware Upgrade
View all D-Link DSS-200G-28MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
D-Link DSS-200G MP/MPP series Switch User Manual Save and Tools Save Configuration Firmware Information Firmware Upgrade Configuration Restore & Backup Ping Reset Reboot System Log Backup Save Configuration This window is used to save the running configuration to the start-up configuration of the switch. This is to prevent the loss of configuration in the event of a power failure. To view the following window, click Save > Save Configuration, as shown below: Figure 4-49 Save Configuration window Click the Apply button to save the configuration to the switch's flash memory. Firmware Information This window is used to show firmware information. To view the following window, click Tools > Firmware Information, as shown below: Figure 4-50 Firmware Information window Boot Up: Clicking the Boot Up button will set that firmware image as the active image to use upon the next system start up. Note: Changing the firmware only happens after the switch has been manually rebooted. In order to boot with the newly selected firmware, make sure that the switch is rebooted. Firmware Upgrade Note: When upgrading the firmware on the DSS-200G MP/MPP Series switch, only the image not currently active can be upgraded. All DSS-200G MP/MPP Series switches come with two images, however only one can be active at any time. (e.g. If image 1 is currently in use, only image 2 can be upgraded, and vice versa.) Note: If the switch is in HTTPS mode, the firmware or configuration cannot be upgraded using regular HTTP. 91