D-Link DSS-200G-28MP Product Manual - Page 59
VLAN Mode, Access, Hybrid, Trunk, Acceptable Frame, Tagged Only, Untagged Only, Admit, Ingress
![]() |
View all D-Link DSS-200G-28MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
D-Link DSS-200G MP/MPP series Switch User Manual Figure 4-38 VLAN Interface Information window More detailed information about the VLAN of the specific interface is displayed. Click the Back button to return to the previous window. After click the Edit button, the following window will appear. This is a dynamic window that will change when a different VLAN Mode was selected. When Access was selected as the VLAN Mode, the following page will appear. Figure 4-39 Configure VLAN Interface- Access window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking VID From Port / To Port Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select this option to enable or disable the ingress checking function. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. If Port Clone is enabled, select the appropriate port range used for the Clone configuration here. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. When Hybrid was selected as the VLAN Mode, the following page will appear. Figure 4-40 Configure VLAN Interface - Hybrid window The fields that can be configured are described below: 54
![](/manual_guide/products/dlink-dss200g10mp-product-manual-2e9d69e/59.png)