D-Link DSS-200G-28MP Product Manual - Page 70
Loopback Detection, From Port / To Port, State, Port Fast, Network, Disabled, Apply
View all D-Link DSS-200G-28MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
D-Link DSS-200G MP/MPP series Switch User Manual Figure 4-35 STP Port Settings window The fields that can be configured are described below: Parameter From Port / To Port State Port Fast Description Select the appropriate port range used for the configuration here. Select the port state. Select the port fast option here. Options to choose from are Network, Disabled, and Edge. In the Network mode the port will remain in the non-port-fast state for three seconds. The port will change to the port-fast state if no BPDU is received and changes to the forwarding state. If the port received the BPDU later, it will change to the non-port-fast state. In the Disable mode, the port will always be in the non-port-fast state. It will always wait for the forward-time delay to change to the forwarding state. In the Edge mode, the port will directly change to the spanning-tree forwarding state when a link-up occurs without waiting for the forward-time delay. If the interface receives a BPDU later, its operation state changes to the non-port-fast state. By default, this option is Edge. Click the Apply button to accept the changes made. Loopback Detection The Loopback Detection (LBD) function is used to detect the loop created by a specific port. This feature is used to temporarily shut down a port on the switch when a CTP (Configuration Testing Protocol) packet has been looped back to the switch. When the switch detects CTP packets received from a port, this signifies a loop on the network. The switch will automatically block the port and send an alert to the administrator. The Loopback Detection port will restart (change to normal state) when the Loopback Detection Recover Time times out. The Loopback Detection function can be implemented on a range of ports at a time. The user may enable or disable this function using the drop-down menu. To view the following window, click L2 Features > Loopback Detection, as shown below: 65