D-Link DSS-200G-28MP Product Manual - Page 62
Management VLAN, VLAN State, Apply, From Port / To Port, VLAN Index, Delete
View all D-Link DSS-200G-28MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
D-Link DSS-200G MP/MPP series Switch User Manual VLAN State Select this option to enable or disable the Port-based VLAN function. Click the Apply button to accept the changes made. When setting the enable the Port-based VLAN: Figure 4-44 Port-based VLAN window The fields that can be configured are described below: Parameter From Port / To Port VLAN Index Description Select the appropriate port range used for the configuration here. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Click the Apply button to accept the changes made. Click the Delete button to delete the specified vlan. NOTE: If you want to delete an existing vlan, you need to delete the member ports first. If you want to delete the last two or four member ports (uplink port) depending on the model, you need to go to Surveillance mode. Management VLAN This window is used to configure the Management VLAN function. To view the following window, click L2 Features > VLAN > Management VLAN, as shown below: 4-45 Management VLAN window The fields that can be configured are described below: Parameter Description 57