D-Link DSS-200G-28MP Product Manual - Page 77
IGMP Snooping Mrouter Settings, Multicast Filtering
![]() |
View all D-Link DSS-200G-28MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
D-Link DSS-200G MP/MPP series Switch User Manual The fields that can be configured for IGMP Snooping Static Groups Settings are described below: Parameter From Port / To Port State Description Select the appropriate port range used for the configuration here. Select this option to enable or disable state. Click the Apply button to accept the changes made. IGMP Snooping Mrouter Settings This window is used to configure and view the IGMP snooping Mrouter, and view IGMP snooping Mrouter. To view the following window, click L2 Features > L2 Multicast Control >IGMP Snooping > IGMP Snooping Mrouter Settings, as shown below: Figure 4-42 IGMP Mrouter Settings The fields that can be configured for IGMP Snooping Mrouter Settings are described below: Parameter VID From Port / To Port Description Enter a VLAN ID of the multicast group. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Multicast Filtering This window is used to view and configure the Layer 2 multicast filtering settings. To view the following window, click L2 Features > L2 Multicast Control > Multicast Filtering, as shown below: Figure 4-43 Multicast Filtering window The fields that can be configured are described below: Parameter Multicast Filter Mode Description Select the multicast filter mode here. Options to choose from are Forward Unregistered and Filter Unregistered. When 72
![](/manual_guide/products/dlink-dss200g10mp-product-manual-2e9d69e/77.png)