Dell 1815dn Service Manual - Page 50

ADF Ass'y

Page 50 highlights

Precautions 5.8 ADF Ass'y 1. Before you remove the ADF Ass'y, you should remove: - Rear Cover (Refer to 5.4) - Side Cover (Left, Right) (Refer to 5.6) - Scanner Ass'y (Refer to 5.7) 2. Release the ADF Harness from the underneath the Platen Cover Ass'y. ADF Harness 4. Remove the Open Cover, as shown below. Open Cover 2 1 2 Platen Cover Ass'y 3. Remove the two screws securing the ADF Engine Ass'y and remove it. ADF Engine Ass'y Notice : When working on the ADF Motor Ass'y take care not to contaminate any of the rubber surfaces with grease. 5. Release the Bush and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Ass'y out. Pick Up Ass'y 1 Bushing 2 Notice : Take care to thread the ADF Harness through the Platen Cover Ass'y. Service Manual 5-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152

Precautions
Service Manual
5-15
5.8 ADF Ass'y
1. Before you remove the ADF Ass'y, you should
remove:
- Rear Cover (Refer to 5.4)
- Side Cover (Left, Right) (Refer to 5.6)
- Scanner Ass'y (Refer to 5.7)
2. Release the ADF Harness from the underneath the
Platen Cover Ass'y.
3. Remove the two screws securing the ADF Engine
Ass'y and remove it.
Notice :
Take care to thread the ADF Harness through
the Platen Cover Ass'y.
4. Remove the Open Cover, as shown below.
Notice :
When working on the ADF Motor Ass'y take
care not to contaminate any of the rubber
surfaces with grease.
5. Release the Bush and rotate it until it reaches the slot,
as shown below. Then lift the Pick Up Ass'y out.
ADF Harness
Platen Cover Ass'y
Open Cover
1
2
2
Pick Up Ass'y
Bushing
1
2
ADF Engine Ass’y