Dell 2135cn User Guide - Page 26

Date Format Sets the date format. The default is yy/mm/dd. Time Format Sets the time format in 24H or 12H. Time Zone Sets the time zone. Set Date Sets the date. Set Time Sets the time. Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes. Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes. Paper Density Purpose: To specify the paper density settings. Values: Plain Normal* Light Specifies plain paper density settings. Label Normal* Light Specifies label paper density settings. Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes. Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes. Registration Adjustment Purpose: To set Color Registration Adjustment (individual yellow, magenta, cyan correction) settings. When Auto Registration Adjustment is set to On, the printer prints the color registration chart and to adjust the color registration by using the chart. This function is required after the printer is set up or moved. Values: Off Auto Registration Adjustment On* Auto Correct Color Regi Chart -9Yellow +9 0* -9Color Registration Adjustment Magenta +9 1 (Lateral) 0* -9- Cyan +9 0* -9Yellow +9 0* -9Color Registration Adjustment Magenta +9 2 (Process) 0* -9- Cyan +9 0* Apply New Settings Restart printer to apply new settings Does not perform color registration automatically. Performs color registration automatically. Click Start to perform color registration automatically. Click Start to print a color registration chart. Specifies lateral (perpendicular to paper feed direction) color adjustment values that are found in the color registration chart individually for Yellow, Magenta, and Cyan. Specifies process (paper feed direction) color adjustment values that are found in the color registration chart individually for Yellow, Magenta, and Cyan. After you complete the settings, press the Apply New Settings button to apply the changes. Press the Restart printer to apply new settings button to apply the changes. Adjust Altitude Purpose: To specify the altitude of the location where the printer is installed.