Dell 2405FPW User Manual - Page 7
Power Management Modes, Pin Assignments, VGA Connector - vesa
View all Dell 2405FPW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Humidity: Operating Nonoperating Altitude: Operating Nonoperating Thermal dissipation 10% to 80% (noncondensing) Storage: 5% to 90% (noncondensing) Shipping: 5% to 90%(noncondensing) 3,657.6 m (12,000 ft) max 12,192 m (40,000 ft) max 272.8 BTU/hour (maximum) 201.2 BTU/hour (typical) Power Management Modes If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving feature: VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation Active Active Active Green 80 W (maximum)* 59 W (normal)** Active-off mode Inactive Inactive Blanked Amber Less than 2 W Switch off - - - Off Less than 1 W * With Audio + USB ** Without Audio + USB NOTE: The OSD will only function in the 'normal operation' mode. Otherwise one of the following messages will appear depending upon the selected input. 1: D-SUB 2: DVI-D In Power Save Mode Press computer power button In Power Save Mode or Press computer power button or any key on keyboard or move mouse or any key on keyboard or move mouse Activate the computer and wake up the monitor to gain access to the OSD. Pin Assignments VGA Connector Pin Number 1 2 3 4 5 6 7 8 9 10 11 15-pin Side of the Connected Signal Cable Video-Red Video-Green Video-Blue GND Self-test GND-R GND-G GND-B Computer 5V/3.3V GND-sync GND