Dell Force10 E300 Installing and Maintaining the E300 System - Page 37
To install SFMs, Rotate the lever to seat the backplane connectors and card in place.
View all Dell Force10 E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
To install SFMs: Step Task 1 Hold the card by the edges. Avoid touching the printed circuit board and connector pins. Extend the card lever before you insert the card into the slot. Align the card with the guide and gently slide it into the slot until you feel the connectors engage with the chassis backplane. 2 Rotate the lever to seat the backplane connectors and card in place. 3 Secure each SFM in place by tightening the captive screw. 4 Repeat steps 1 through 4 for the other SFM. Installing RPMs, Line Cards, and SFMs | 37
Installing RPMs, Line Cards, and SFMs
|
37
To install SFMs:
Step
Task
1
Hold the card by the edges. Avoid touching the printed circuit board and connector pins. Extend the card lever
before you insert the card into the slot.
Align the card with the guide and gently slide it into the slot until you feel the connectors engage with the chassis
backplane.
2
Rotate the lever to seat the backplane connectors and card in place.
3
Secure each SFM in place by tightening the captive screw.
4
Repeat steps 1 through 4 for the other SFM.