Dell Force10 E300 Installing and Maintaining the E300 System - Page 41
Accessing the Console with a DB-25 Adapter, Accessing the Auxiliary Port by Modem, Table 8-3.
View all Dell Force10 E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
You can connect to the console using a RJ-45 to RJ-45 rollover cable and a RJ-45 to DB-9 female DTE adapter (labeled "TERMINAL") to a terminal server (for example, PC). The table below list the pin assignments. Table 8-3. Pin Assignments Between the E300 Console and a DTE Terminal Server E300 System Console Port Signal RTS DTR TxD GND GND RxD DSR CTS RJ-45 to RJ-45 Rollover Cable RJ-45 pinout 1 2 3 4 5 6 7 8 RJ-45 Pinout 8 7 6 5 4 3 2 1 RJ-45 to DB-9 Adapter DB-9 Pin 8 6 2 5 5 3 4 7 Terminal Server Device Signal CTS DSR RxD GND GND TxD DTR RTS Accessing the Console with a DB-25 Adapter You can connect to the console using a RJ-45 to RJ-45 rollover cable and a RJ-45 to a DB-25 female DTE adapter. Table 8-4 lists the pin assignments. You can connect to the console using a RJ-45 to RJ-45 rollover cable and a RJ-45 to a DB-25 female DTE adapter. The table below lists the pin assignments. Table 8-4. Pin Assignments Between E300 Console and DB-25 Adapter E300 System Console Port Signal RTS DTR TxD GND GND RxD DSR CTS RJ-45 to RJ-45 Rollover Cable RJ-45 Pinout 1 2 3 4 5 6 7 8 RJ-45 Pinout 8 7 6 5 4 3 2 1 RJ-45 to DB-25 Modem Adapter DB-25 Pinout 5 6 3 7 7 2 20 Terminal Server Device Signal CTS DSR RxD GND GND TxD DTR RTS Accessing the Auxiliary Port by Modem You can access the auxiliary port using a dial-up modem using a RJ-45 to RJ-45 rollover cable and a RJ45 to a DB-25 male DCE adapter (labeled "MODEM"). Table 8-5 lists the pin assignments. RPM Ports and Cables | 41