Dell Latitude D631 User's Guide - Page 121
Align the notch in the module connector with the tab in the connector slot.
View all Dell Latitude D631 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
2 1 1 securing clips (2 per connector) 2 memory module 5 Ground yourself and install the new memory module: NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure. a Align the notch in the module connector with the tab in the connector slot. b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it. To add or replace a memory module in the DIMM B connector: NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMMA" before you install a module in the connector labeled "DIMMB." Insert memory modules at a 45degree angle to avoid damaging the connector. 1 Follow the procedures in "Before You Begin" on page 113. Adding and Replacing Parts 121