Dell OptiPlex Gs Service Manual (.pdf) - Page 62
-Inch Diskette Drive Assembly,
View all Dell OptiPlex Gs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3.5-Inch Diskette Drive Assembly drive-mounting screws (2) 3.5-inch diskette-drive assembly latches (2) hooks (2) Figure 4-6. 3.5-Inch Diskette-Drive Assembly Removal To remove the 3.5-inch diskette drive assembly, follow these steps: 1. Disconnect the DC power cable and the interface cable from the back of the diskette drive. 2. Press in the two 3.5-inch diskette-drive assembly latches to release the assembly. Rotate the left side of the assembly up, and lift the assembly out of the chassis. 3. Remove the two drive-mounting screws from the left side of the drive, and remove the drive from the bracket. When you replace the 3.5-inch diskette drive, be sure the mounting holes on the right side of the drive engage the two hooks on the bracket. 4-8 Dell OptiPlex Gs and Gs+ Systems Service Manual