Dell OptiPlex Gs Service Manual (.pdf) - Page 72
Microprocessor/Heat Sink Assembly, Microprocessor Securing-Clip Removal
View all Dell OptiPlex Gs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Microprocessor/Heat Sink Assembly press here to release clip microprocessor securing clip (hooks over tabs on the socket) Figure 4-17. Microprocessor Securing-Clip Removal To remove the microprocessor/heat sink assembly, follow these steps: 1. Remove the microprocessor securing clip from the microprocessor/heat sink assembly. Then remove the heat sink from the microprocessor chip. WARNING: The microprocessor/heat sink assembly can get extremely hot during system operations. Be sure the assembly has had sufficient time to cool before touching it. Press down on the folded part of the clip with a small screwdriver to release the clip. 2. Push outward and then upward on the microprocessor-socket release lever to rotate the lever to its fully vertical position (see Figure 4-18). 3. Lift the microprocessor chip out of its socket. 4-18 Dell OptiPlex Gs and Gs+ Systems Service Manual