Dell OptiPlex Gs Service Manual (.pdf) - Page 81
Eject, Power, and Reset Buttons, To remove the eject, follow these steps
View all Dell OptiPlex Gs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Eject, Power, and Reset Buttons computer cover (upside down) reset button power button eject button Figure 5-3. Eject-, Power, and Reset-Button Removal To remove the eject, power, and reset buttons, follow these steps: 1. Lay the computer cover upside down on a flat work surface, with the back of the cover facing you. 2. To remove the 3.5-inch diskette-drive eject button, pull gently on the plastic part of the button until it comes free. To remove the power button and the reset button, use a small screwdriver to push in the two or three plastic clips that secure the buttons to the computer cover. When these clips are released, the buttons come free from the cover. Removing and Replacing Parts in the Midsize System 5-5
Removing and Replacing Parts in the Midsize System
5-5
E
ject, Power, and Reset Buttons
Figure 5-3.
Eject-, Power, and Reset-Button Removal
To remove the eject, power, and reset buttons, follow these steps:
1.
Lay the computer cover upside down on a flat work surface, with the
back of the cover facing you.
2.
To remove the 3.5-inch diskette-drive eject button, pull gently on the
plastic part of the button until it comes free.
To remove the power button and the reset button, use a small screw-
driver to push in the two or three plastic clips that secure the buttons to
the computer cover.
When these clips are released, the buttons come free from the cover.
power button
reset button
computer cover
(upside down)
eject button