Dell OptiPlex Gs Service Manual (.pdf) - Page 85

Externally Accessible Drive Assemblies, Inch Diskette-Drive Assembly Removal

Get Dell OptiPlex Gs PDF manuals and user guides View all Dell OptiPlex Gs manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

Externally Accessible Drive Assemblies bracket-mounting screw drive-mounting screws (2) hooks (2) Figure 5-7. 3.5-Inch Diskette-Drive Assembly Removal To remove the 3.5-inch diskette drive, follow these steps: 1. Disconnect the DC power cable and the interface cable from the back of the 3.5-inch diskette drive. 2. Remove the bracket-mounting screw. 3. Rotate the left side of the 3.5-inch diskette drive assembly up, and lift the assembly out of the chassis. 4. Remove the two drive-mounting screws from the left side of the drive, and remove the drive from the bracket. When you replace the 3.5-inch diskette drive, be sure the two hooks on the right side of the bracket engage the mounting holes in the side of the 3.5-inch diskette drive. Removing and Replacing Parts in the Midsize System 5-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
Removing and Replacing Parts in the Midsize System
5-9
Externally Accessible Drive Assemblies
Figure 5-7.
3.5-Inch Diskette-Drive Assembly Removal
To remove the 3.5-inch diskette drive, follow these steps:
1.
Disconnect the DC power cable and the interface cable from the back of
the 3.5-inch diskette drive.
2.
Remove the bracket-mounting screw.
3.
Rotate the left side of the 3.5-inch diskette drive assembly up, and lift
the assembly out of the chassis.
4.
Remove the two drive-mounting screws from the left side of the drive,
and remove the drive from the bracket.
When you replace the 3.5-inch diskette drive, be sure the two hooks on the right
side of the bracket engage the mounting holes in the side of the 3.5-inch diskette
drive.
bracket-mounting screw
hooks (2)
drive-mounting
screws (2)