Dell PowerConnect FCS624S Configuration Guide - Page 1119

Displaying BGP4 information 30 TABLE 187 BGP4 route summary information for a neighbor (Continued) Field Description NLRIs Sent in Update Message Peer Out of Memory Count for The number of NLRIs for new routes the Layer 3 Switch has sent to this neighbor in UPDATE messages: • Withdraws - The number of routes the Layer 3 Switch has sent to the neighbor to withdraw. • Replacements - The number of routes the Layer 3 Switch has sent to the neighbor to replace routes the neighbor already has. Statistics for the times the Layer 3 Switch has run out of BGP4 memory for the neighbor during the current BGP4 session: • Receiving Update Messages - The number of times UPDATE messages were discarded because there was no memory for attribute entries. • Accepting Routes(NLRI) - The number of NLRIs discarded because there was no memory for NLRI entries. This count is not included in the Receiving Update Messages count. • Attributes - The number of times there was no memory for BGP4 attribute entries. • Outbound Routes(RIB-out) - The number of times there was no memory to place a "best" route into the neighbor's route information base (Adj-RIB-Out) for routes to be advertised. Displaying advertised routes To display the routes the Layer 3 Switch has advertised to a specific neighbor for a specific network, enter a command such as the following at any level of the CLI. PowerConnect#show ip bgp neighbors 192.168.4.211 advertised-routes There are 2 routes advertised to neighbor 192.168.4.211 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST I:IBGP L:LOCAL Network Next Hop Metric LocPrf Weight 1 102.0.0.0/24 192.168.2.102 12 32768 2 200.1.1.0/24 192.168.2.102 0 32768 Status BL BL You also can enter a specific route, as in the following example. PowerConnect#show ip bgp neighbors 192.168.4.211 advertised 200.1.1.0/24 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST I:IBGP L:LOCAL Network Next Hop Metric LocPrf Weight Status 1 200.1.1.0/24 192.168.2.102 0 32768 BL Syntax: show ip bgp neighbors advertised-routes [/] For information about the fields in this display, refer to Table 189 on page 1083. The fields in this display also appear in the show ip bgp display. Displaying the best routes To display the routes received from a specific neighbor that are the "best" routes to their destinations, enter a command such as the following at any level of the CLI. PowerConnect#show ip bgp neighbors 192.168.4.211 routes best Syntax: show ip bgp neighbors routes best For information about the fields in this display, refer to Table 189 on page 1083. The fields in this display also appear in the show ip bgp display. PowerConnect B-Series FCX Configuration Guide 53-1002266-01 1077