Dell PowerConnect FCS624S Configuration Guide - Page 802

25 PIM Sparse TABLE 137 Output of show ip pim mcache (Continued) This field... Displays... RPT SPT Register Suppress member ports virtual ports prune ports virtual prune ports Indicates whether the cache entry uses the RP path or the SPT path. The RPT flag can have one of the following values: • 0 - The SPT path is used instead of the RP path. • 1- The RP path is used instead of the SPT path. NOTE: The values of the RP and SPT flags are always opposite (one is set to 0 and the other is set to 1). Indicates whether the cache entry uses the RP path or the SPT path. The SP flag can have one of the following values: • 0 - The RP path is used instead of the SPT path. • 1- The SPT path is used instead of the RP path. NOTE: The values of the RP and SPT flags are always opposite (one is set to 0 and the other is set to 1). Indicates whether the Register Suppress timer is running. This field can have one of the following values: • 0 - The timer is not running. • 1 - The timer is running. Indicates the Layer 3 Switch physical ports to which the receivers for the source and group are attached. The receivers can be directly attached or indirectly attached through other PIM Sparse routers. Indicates the virtual interfaces to which the receivers for the source and group are attached. The receivers can be directly attached or indirectly attached through other PIM Sparse routers. Indicates the physical ports on which the Layer 3 Switch has received a prune notification (in a Join/Prune message) to remove the receiver from the list of recipients for the group. Indicates the virtual interfaces ports on which the Layer 3 Switch has received a prune notification (in a Join/Prune message) to remove the receiver from the list of recipients for the group. 760 PowerConnect B-Series FCX Configuration Guide 53-1002266-01