Dell PowerConnect FCS624S Configuration Guide - Page 1223

Configuring RADIUS security 32 Example PowerConnect#show web-connection We management Sessions: User Privilege IP address roy READ-WRITE 10.1.1.3 MAC address Timeout(secs) 0030.488.b84d9 279 Syntax: show web connection Use the following command to clear web connections: PowerConnect#clear web-connection Connection HTTPS Syntax: clear web connection After issuing the clear web connection command, the show web connection command displays the following output: PowerConnect#show web-connection No WEB-MANAGEMENT sessions are currently established! Configuring RADIUS security You can use a Remote Authentication Dial In User Service (RADIUS) server to secure the following types of access to the Layer 2 Switch or Layer 3 Switch: • Telnet access • SSH access • Web management access • Access to the Privileged EXEC level and CONFIG levels of the CLI NOTE Dell PowerConnect devices do not support RADIUS security for SNMP (Brocade Network Advisor) access. RADIUS authentication, authorization, and accounting When RADIUS authentication is implemented, the Dell PowerConnect device consults a RADIUS server to verify user names and passwords. You can optionally configure RADIUS authorization, in which the Dell PowerConnect device consults a list of commands supplied by the RADIUS server to determine whether a user can execute a command he or she has entered, as well as accounting, which causes the Dell PowerConnect device to log information on a RADIUS accounting server when specified events occur on the device. RADIUS authentication When RADIUS authentication takes place, the following events occur. 1. A user attempts to gain access to the Dell PowerConnect device by doing one of the following: • Logging into the device using Telnet, SSH, or the Web Management Interface • Entering the Privileged EXEC level or CONFIG level of the CLI PowerConnect B-Series FCX Configuration Guide 53-1002266-01 1181