Dell PowerConnect FCS624S Configuration Guide - Page 1420

40 Displaying SNMP Information PowerConnect#show snmp group groupname = exceptifgrp security model = v3 security level = authNoPriv ACL id = 2 readview = exceptif writeview = Syntax: show snmp group The value for security level can be one of the following. Security level noauthNoPriv authNoPriv Authentication If the security model shows v1 or v2, then security level is blank. User names are not used to authenticate users; community strings are used instead. Displays if the security model shows v3 and user authentication is by user name only. Displays if the security model shows v3 and user authentication is by user name and the MD5 or SHA algorithm. Displaying user information To display the definition of an SNMP user account, enter a command such as the following. PowerConnect#show snmp user username = bob ACL id = 2 group = admin security model = v3 group ACL id = 0 authtype = md5 authkey = 3aca18d90b8d172760e2dd2e8f59b7fe privtype = des, privkey = 1088359afb3701730173a6332d406eec engine ID= 800007c70300e052ab0000 Syntax: show snmp user Interpreting varbinds in report packets If an SNMP version 3 request packet is to be rejected by an SNMP agent, the agent sends a report packet that contains one or more varbinds. The varbinds contain additional information, showing the cause of failures. An SNMP manager application decodes the description from the varbind. The following table presents a list of varbinds supported by the SNMP agent. Varbind object Identifier 1. 3. 6. 1. 6. 3. 11. 2. 1. 3. 0 1. 3. 6. 1. 6. 3. 12. 1. 5. 0 1. 3. 6. 1. 6. 3. 15. 1. 1. 1. 0 1. 3. 6. 1. 6. 3. 15. 1. 1. 2. 0 Description Unknown packet data unit. The value of the varbind shows the engine ID that needs to be used in the snmp-server engineid command Unsupported security level. Not in time packet. 1378 PowerConnect B-Series FCX Configuration Guide 53-1002266-01