Dell PowerConnect FCS624S Configuration Guide - Page 39

About This Document Introduction This guide describes the following product families from Dell: • PowerConnect B-Series FCX Stackable Switches. This guide includes procedures for configuring the software. The software procedures show how to perform tasks using the CLI. This guide also describes how to monitor Dell products using statistics and summary screens. This guide applies to the PowerConnect models listed in Table 1. Device nomenclature TABLE 1 This name Table 1 lists the terms (product names) contained in this guide and the specific set of devices to which each term refers. PowerConnect family of switches Refers to these devices PowerConnect Stackable Devices NOTE: The PowerConnect Stackable Devices include the PowerConnect B-Series FCX devices. PowerConnect B-Series FCX PowerConnect B-FCX624s,PowerConnect B-FCX648s,PowerConnect B-FCX624-E, PowerConnect B-FCX624-I, PowerConnect B-FCX648-E, PowerConnect B-FCX648-I NOTE: All PowerConnect B-Series FCX devices can be ordered from the factory as -ADV models. ADV models include support for Layer 3 BGP. PowerConnect B-FCXE and PowerConnect B-FCXI models require an optional SFP+ module to support stacking. Audience This document is designed for system administrators with a working knowledge of Layer 2 and Layer 3 switching and routing. If you are using a Layer 3 Switch, you should be familiar with the following protocols if applicable to your network - IP, RIP, OSPF, BGP, ISIS, IGMP, PIM, DVMRP, and VRRP. PowerConnect B-Series FCX Configuration Guide 53-1002266-01 xxxix