Dell PowerConnect FCS624S Configuration Guide - Page 1128

30 Displaying BGP4 information TABLE 190 BGP4 route information (Continued) Field Description Weight Atomic Aggregation ID Aggregation AS Originator Cluster List Learned From Admin Distance Adj_RIB_out Communities The value that this router associates with routes from a specific neighbor. For example, if the router receives routes to the same destination from two BGP4 neighbors, the router prefers the route from the neighbor with the larger weight. Whether network information in this route has been aggregated and this aggregation has resulted in information loss. NOTE: Information loss under these circumstances is a normal part of BGP4 and does not indicate an error. The router that originated this aggregator. The AS in which the network information was aggregated. This value applies only to aggregated routes and is otherwise 0. The originator of the route in a route reflector environment. The route-reflector clusters through which this route has passed. The IP address of the neighbor from which the Layer 3 Switch learned the route. The administrative distance of the route. The number of neighbors to which the route has been or will be advertised. This is the number of times the route has been selected as the best route and placed in the Adj-RIB-Out (outbound queue) for a BGP4 neighbor. The communities the route is in. Displaying BGP4 route-attribute entries The route-attribute entries table lists the sets of BGP4 attributes stored in the router memory. Each set of attributes is unique and can be associated with one or more routes. In fact, the router typically has fewer route attribute entries than routes. To display the route-attribute entries table, use one of the following methods. To display the IP route table, enter the following command. PowerConnect#show ip bgp attribute-entries Syntax: show ip bgp attribute-entries Here is an example of the information displayed by this command. A zero value indicates that the attribute is not set. PowerConnect#show ip bgp attribute-entries Total number of BGP Attribute Entries: 7753 1 Next Hop :192.168.11.1 Metric :0 Originator:0.0.0.0 Cluster List:None Aggregator:AS Number :0 Router-ID:0.0.0.0 Local Pref:100 Communities:Internet AS Path :(65002) 65001 4355 2548 3561 5400 6669 5548 2 Next Hop :192.168.11.1 Metric :0 Originator:0.0.0.0 Cluster List:None Aggregator:AS Number :0 Router-ID:0.0.0.0 Local Pref:100 Communities:Internet AS Path :(65002) 65001 4355 2548 Table 191 lists the field definitions for the command output. Origin:IGP Atomic:FALSE Origin:IGP Atomic:FALSE 1086 PowerConnect B-Series FCX Configuration Guide 53-1002266-01