Dell PowerConnect FCS624S Configuration Guide - Page 1247

AES encryption for SSH2 33 AES encryption for SSH2 Encryption is provided with 3des-cbc, aes128-cbc, aes192-cbc or aes256-cbc. AES encryption has been adopted by the U.S. Government as an encryption standard. A total of five SSH connections can be active on a Dell PowerConnect device. To display information about SSH connections, enter the following command. PowerConnect#show ip ssh Connection Version Encryption 1 SSH-2 3des-cbc 2 SSH-2 3des-cbc 3 SSH-2 aes128-cbc 4 SSH-2 aes192-cbc 5 SSH-2 aes256-cbc Username Raymond Ron David Francesca Bob You can also use the show who command to display information about SSH connections PowerConnect#show who Console connections: Established you are connecting to this session 2 minutes 56 seconds in idle SSH connections: 1. established, client ip address 2.2.2.1, user is Raymond 1 minutes 15 seconds in idle 2. established, client ip addres 2.2.2.2, user is Ron 2 minutes 25 seconds in idle 3. established, client ip address 2.2.2.1, user is David 1 minutes 8 seconds in idle 4. established, client ip address 2.2.2.1, user is Franchesca 2 minutes 32 seconds in idle 5. established, client ip address 2.2.2.3, user is Bob 5 minutes 17 seconds in idle To terminate an active connection, enter the following command PowerConnect#kill ssh 1 Syntax: kill ssh Configuring SSH2 The Dell implementation of SSH2 supports two kinds of user authentication: • DSA challenge-response authentication, where a collection of public keys are stored on the device. Only clients with a private key that corresponds to one of the stored public keys can gain access to the device using SSH. NOTE SSH2 supports and validates DSA keys only. It does not support or validate SSH1 RSA keys. PowerConnect B-Series FCX Configuration Guide 53-1002266-01 1205