Dell PowerEdge 1655MC Information and Firmware Update - Page 20
Replacing Hard Drives in a Mirrored Configuration
View all Dell PowerEdge 1655MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
www.dell.com | support.dell.com 5 Press to display the OSCAR menu, and then double-click the appropriate server module. 6 Press to enter the System Setup program, and select the Boot Sequence option. Ensure that the USB diskette drive is first in the boot sequence. 7 Save the changes and exit the System Setup program. 8 Reboot the server module to run the system board replacement utility. 9 When prompted, press any key to recreate the mirror and reboot the server module. 10 Remove the USB diskette drive. Replacing Hard Drives in a Mirrored Configuration If you replace a hard drive in a mirrored configuration and the new hard drive does not automatically resynchronize, perform the following steps: 1 Remove the faulty hard drive. 2 Install the server module in the system without the new hard drive installed. 3 Turn on the server module. This allows the firmware to detect that the hard drive was removed. 4 Turn off the server module and install the new hard drive. 5 Install the server module in the system. 6 Turn on the server module. During POST, the following message displays: Logical Drive is Degraded At this point, the hard drive begins to resynchronize. Online Diagnostics SCSI Controller Test Issue When Using a Linux Console When you run the online diagnostics SCSI controller test from a Linux console, the LSI driver for the SCSI controller sends a SCSI error report to the screen. This is for information only and does not indicate an error. If there were an actual error, the operating system would report an error. 1-16 Information and Firmware Update