Dell PowerEdge M620 Owners Manual - Page 107
memory for system operation., System BIOS detected memory, but was unable to con
View all Dell PowerEdge M620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Error Code PDR1024 PST0128 PST0129 PST0130 PST0131 Message Information Details Action The controller detected that the drive was removed. Verify drive installation. Re-seat the failed drive. If the issue persists, see Getting Help. Message LCD Message Details Action Drive mismatch detected for drive in disk drive bay . Drive mismatch detected for drive in bay . Install correct drive type. The installed disk does not meet the array requirements, for example a SATA disk may not operate in an array containing SAS drives. Verify that the disk meets the array requirements. Message LCD Message Details Action No memory is detected. No memory is detected. Inspect memory devices. System BIOS was unable to detect memory in the system . Re-seat the memory modules. If the issue persists, see Getting Help. Message LCD Message Details Action Memory is detected, but is not configurable. Memory is detected, but is not configurable. Check memory devices. System BIOS detected memory, but was unable to configure the memory for system operation. Compare system memory installation to supported system memory configurations. Message LCD Message Details Action Memory is configured, but not usable. Memory is configured, but not usable. Check memory devices The system BIOS encountered device failures or speed configurations that resulted in unused memory. Re-seat the memory modules. If the issue persists, see Getting Help. Message LCD Message Details Action System BIOS shadow failed. System BIOS shadow failed. Check memory devices. Memory errors occurred copying BIOS image into system memory. Remove input power. Reduce system memory to minimum configuration and apply input power. 107