Dell PowerEdge M620 Owners Manual - Page 36
Removing Memory Modules, A1, A2, A3, A4, A5, A6, A7, A8
View all Dell PowerEdge M620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
System Capacity (in GB) 384 DIMM Size (in GB) 16 Number of DIMMs 24 512 32 16 768 32 24 Organization and Speed 2R x4, 1333 MT/s 4R x4, 1333 MT/s 4R x4, 1333 MT/s (LRDIMMs only) DIMM Slot Population A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A12, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12 A1, A2, A3, A4, A5, A6, A7, A8, B1, B2, B3, B4, B5, B6, B7, B8 A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A12, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12 Removing Memory Modules WARNING: The DIMMs are hot to touch for some time after the blade has been powered down. Allow time for the DIMMs to cool before handling them. Handle the DIMMs by the card edges and avoid touching the DIMM components. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. CAUTION: To ensure proper system cooling, memory-module blanks must be installed in any memory socket that is not occupied. Remove memory-module blanks only if you intend to install memory in those sockets. CAUTION: If you are permanently removing a processor, you must install a socket protective cap and a processor/ DIMM blank in the vacant socket to ensure proper system cooling. The processor/DIMM blank covers the vacant sockets for the DIMMs and the processor. 1. Remove the blade from the enclosure. 2. Open the blade. 3. Remove the cooling shroud. 4. Locate the memory module socket(s). CAUTION: Handle each memory module only on either card edge, making sure not to touch the middle of the memory module. 5. Press down and out on the ejectors on each end of the socket until the memory module pops out of the socket. 6. Install the cooling shroud. 7. Close the blade. 8. Install the blade in the enclosure. 36