Dell PowerEdge M620 Owners Manual - Page 122
If the system event log fails to initialize, platform status and failure, events are not captured.
View all Dell PowerEdge M620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Error Code SEL0006 SEL0008 SEL0010 SEL0012 SEL1204 SEL1209 Message Information Action If unintended, re-enable logging. Message Details Action All event logging is disabled. This message is displayed when all event logging has been disabled by the user. If unintended, re-enable logging. Message Details Action Log is full. When the event log is full, additional events are not written to the log. Older events may be overwritten and lost. This message may also appear if the user disabled event logging. Backup and clear log. Message Details Action Log is almost full. When the event log is full, additional events are not written to the log. Older events may be overwritten and lost. Backup and clear log at the next maintained time. Message Details Action Could not create or initialize the system event log. If the system event log fails to initialize, platform status and failure events are not captured. Some management software do not report platform exceptions. Reboot the management controller or iDRAC. Cycle system input power. If problem persists call support. Message LCD Message Details Action An unknown system hardware failure detected. Unknown system hardware failure. If the system event log failed to initialize platform status and failure events are not captured. Some management software will not report platform exceptions. Re-configure system to minimum supported configuration. If issues persists, contact support. Message Details The platform event filter action failed. System policies or permissions may prevent the action from executing. If configured, the system does not execute the action on 122