Dell PowerEdge M620 Owners Manual - Page 84
Review system logs for power or thermal exceptions.
View all Dell PowerEdge M620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Error Code CPU0008 CPU0010 CPU0023 CPU0100 CPU0101 CPU0102 CPU0103 84 Message Information Action 1. Turn system off and remove input power for one minute. Reapply input power and turn system on. 2. Make sure the processor is seated correctly. 3. If the issue persists, see Getting Help. Message Details Action Message Details Action Message LCD Message Action Message Details Action Message LCD Message Details Action Message Details Action Message CPU is disabled. System is unable to boot or may run in a degraded state. If unexpected, check presence, and system setup (BIOS) configuration. CPU is throttled. The CPU is throttled due to thermal or power conditions. Review system logs for power or thermal exceptions. CPU is absent. CPU is absent. Check CPU. Verify processor installation. If present, re-seat the processor. CPU temperature is less than the lower warning threshold. System performance may be degraded. Check system operating environment. CPU temperature is less than the lower critical threshold. CPU temperature is outside of range. System performance may be degraded. Check system operating environment, fans, and heat-sinks. CPU temperature is greater than the upper warning threshold. System performance may be degraded. Check system operating environment, fans, and heat-sinks. CPU temperature is greater than the upper critical threshold.