Home » Dell Manuals » Servers » Dell PowerEdge MX7000 » Manual Viewer

Dell PowerEdge MX7000 EMC OpenManage Enterprise-Modular Edition Version 1.10.2 - Page 56

Replacing storage sleds, Updating enclosure firmware, Updating the firmware using DUP

View all Dell PowerEdge MX7000 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Replacing storage sleds When you remove a storage sled from one slot and insert it into another slot on the chassis, the mapping on the new slot is used for the storage sled. If you replace the storage sled with a brand new sled which does not have a service tag, the service tag and the mapping of the sled that was present in the slot earlier, are applied. However, the storage sled firmware is not replaced automatically. Updating enclosure firmware You can update or rollback the storage enclosure firmware using the OME-Modular. Use the following methods to update the firmware: 1. Dell Update Package (DUP) 2. Catalog-based compliance method NOTE: The OME-Modular is inaccessible during the update process. Updating the firmware using DUP 1. Download the DUP from www.dell.com/support/drivers. 2. On the OME-Modular web interface, go to Devices > Storage. 3. Select the storage sled on which you want to update the firmware. 4. Click Update Firmware. 5. Select the Individual package option and click Browse to go to the location where you have downloaded the DUP. Wait for the comparison report, the supported components are displayed. 6. Select the required components and click Update to start the firmware update. 7. Go to the Monitoring > Jobs page to view the job status. Updating the firmware using catalog-based compliance 1. On theOME-Modular web interface, go to Devices > Storage. 2. Select the storage sled on which you want to update the firmware. 3. Click Update Firmware. 4. Select the baseline and click Next. The Schedule Update page is displayed. 5. Select the Schedule Update options as required. • Update Now-apply the firmware updates immediately. • Schedule Later-schedule the firmware updates for a later date. Select the required date and time. Downgrading storage enclosure firmware Follow these steps to roll back the firmware for a storage enclosure: 1. On the OME-Modular web interface, go to Devices > Storage. 2. Select the system and click View Details. 3. Click Rollback Firmware. 4. Select the available version of the firmware and click Confirm to continue. Managing SAS IOMs The internal connection of the storage subsystem is called "Fabric C", which serves as a communication mode between compute sleds and storage enclosures. The "Fabric C" is used for SAS of FC storage connectivity and includes a midplane. SAS IOMs allow creating storage assignments in which you can map storage enclosure drives or whole storage enclosures to compute sleds. SAS IOMs provide multi-path input out access for compute sleds to drive elements. The active module manages the SAS IOM and is responsible for all inventory and storage assignments on the fabric. 56 Managing storage

Section	Page
Dell EMC OpenManage Enterprise-Modular Edition Version 1.10.20 for PowerEdge MX7000 Chassis User's Guide	3
Overview	8
Key features	8
New in this release	8
Supported platforms	9
Supported web browsers	9
Other documents you may need	9
Accessing documents from Dell support site	10
Positioning OME-Modular with other Dell EMC applications	10
Updating the management module firmware	11
Updating the firmware using catalog-based compliance method	11
Updating MX7000 components using OME-Modular 1.10.20	12
Component update order	12
Updating iDRAC with Lifecycle Controller using OME-Modular	12
Updating PowerEdge MX740c BIOS and PowerEdge MX840c Server BIOS	13
Updating adapters	13
Updating OME-Modular	13
Updating Fabric Switching Engine and Ethernet Switch	13
Upgrading Networking Switch CLI	14
Logging in to OME-Modular	17
Logging in to OME–Modular as local, Active Directory, or LDAP user	17
Logging in to OME-Modular as Active Directory or LDAP user	18
Importing directory group	18
Logging in to OME–Modular using the directory user credentials	18
OME-Modular home page	18
Multi-chassis management dashboard	19
Viewing device health	20
Setting up chassis	20
Initial configuration	20
Configuring chassis settings	21
Configure chassis power	21
Configure chassis management network	22
Configure chassis network services	24
Configure local access	24
Chassis Direct	25
Configure chassis location	26
Configure Quick Deploy settings	27
Managing chassis	28
Creating chassis filters	28
Viewing chassis overview	28
Wiring chassis	29
Chassis groups	30
Prerequisites for creating a wired group	30
Creating chassis groups	31
Adding member chassis to groups	32
Adding member chassis from lead chassis	32
Adding individual chassis to chassis groups	32
Assigning backup lead	32
Promoting backup chassis as lead	33
Retiring lead chassis	33
MCM dashboard	34
Controlling chassis power	34
Backing up chassis	34
Restoring chassis	35
Exporting chassis profiles	35
Managing chassis failover	35
Troubleshooting in chassis	36
Blinking LEDs	36
Interfaces to access OME-Modular	36
Viewing chassis hardware	37
Chassis slot details	38
Viewing chassis alerts	38
Viewing chassis hardware logs	38
Configuring OME–Modular	38
Viewing current configuration	39
Configuring OME–Modular IP address	39
Configuring OME–Modular web server	39
Configuring session inactivity timeout	39
Configuring OME–Modular date and time settings	40
Configuring OME–Modular proxy settings	40
Changing device naming and preference	40
Ports and protocols supported in OME-Modular	40
Configuring users and user settings	41
Viewing and editing user accounts	42
Adding users	42
Enabling, disabling, and deleting users	42
Recovering passwords	42
User roles and privileges	43
Managing user sessions	43
Viewing user sessions	43
Terminating user sessions	43
Importing Directory Group	44
Adding directory services	44
Deleting directory services	45
Configuring login security settings	45
Configuring login IP range	45
Configuring login lockout policy	45
Enabling FIPS mode	45
Managing certificates	45
Uploading certificates	46
Generating certificate signing request	46
Configuring alerts	46
Configuring email alerts	46
Configuring SNMP alerts	46
Configuring sys log alerts	47
Managing compute sleds	48
Viewing compute overview	48
Configuring compute settings	50
Configuring compute network settings	50
Configuring compute management settings	50
Replacing compute sleds	50
Viewing compute hardware	51
Viewing compute firmware	51
Viewing compute hardware logs	52
Viewing compute alerts	52
Managing storage	53
Storage overview	53
Viewing hardware details	54
Assigning drives to a compute sled	55
Assigning storage enclosure to a compute sled	55
Replacing storage sleds	56
Updating enclosure firmware	56
Updating the firmware using DUP	56
Updating the firmware using catalog-based compliance	56
Downgrading storage enclosure firmware	56
Managing SAS IOMs	56
SAS IOM Overview	57
Force active	58
Clearing configuration	58
Extracting IOM logs	58
Managing templates	59
Viewing template details	59
Creating templates	59
Importing templates	60
Deploying templates	60
Deploying templates from Template Details page	60
Editing templates	61
Editing template networks	61
Cloning templates	61
Exporting templates	61
Deleting templates	61
Managing identity pools	63
Creating identity pools	63
Editing identity pools	64
Exporting identity pools	65
Deleting identity pools	65
Ethernet IO Modules	66
Viewing hardware details	67
Configuring IOM settings	67
Configuring IOM network settings	67
Configuring Linux administrator password	68
Configuring SNMP settings	68
Configuring advanced settings	68
Configuring ports	68
Configuring admin status	69
Configuring Maximum Transmission Unit	69
Configuring auto negotiation	69
MX Scalable Fabric architecture	70
Recommended physical topology	70
Restrictions and guidelines	71
Recommended connection order	72
SmartFabric Services	73
Guidelines for operating in SmartFabric mode	74
SmartFabric network topologies	74
Switch to switch cabling	75
Upstream network switch requirements	76
NIC teaming restrictions	76
CLI commands available in Fabric mode	77
Viewing fabric details	77
Adding fabric	77
Adding uplinks	78
Adding network	78
Editing uplink	79
Viewing topology details	79
Editing fabric details	79
Deleting uplinks	79
Deleting fabric	80
VLANs for SmartFabrics and FCoE	80
Defining VLANs	80
Editing VLANs	80
VLAN scaling guidelines	81
Managing networks	82
SmartFabric VLAN management and automated QoS	82
Defining networks	83
Editing networks	83
Exporting network configurations	83
Deleting network configurations	83
Managing Fibre Channel IOMs	85
Managing firmware	86
Creating baselines	86
Checking compliance	87
Editing baselines	87
Managing catalogs	87
Viewing catalogs	88
Adding catalogs	88
Editing catalogs	89
Deleting catalogs	89
Updating firmware	89
Rolling back firmware	89
Deleting firmware	90
Monitoring alerts and logs	91
Alert log	91
Filtering alert logs	91
Acknowledging alert logs	92
Unacknowledging alert logs	92
Ignoring alert logs	92
Exporting alert logs	92
Deleting alert logs	92
Alert policies	92
Creating alert policies	93
Enabling alert policies	93
Editing alert policies	93
Disabling alert policies	94
Deleting alert policies	94
Alert definitions	94
Filtering alert definitions	94
Monitoring audit logs	95
Filtering audit logs	95
Exporting audit logs	95
Monitoring jobs	96
Filtering jobs	96
Viewing job details	97
Running jobs	97
Stopping jobs	97
Enabling jobs	98
Disabling jobs	98
Deleting jobs	98
Use case scenarios	99
Assigning backup to the MCM Lead	99
Creating chassis group with backup lead	99
Monitoring the MCM group	100
Scenarios when backup lead can take over as lead chassis	101
Disaster recovery of lead chassis	101
Retiring lead chassis	103
Troubleshooting	104
Storage	104
Firmware update is failing	104
Storage assignment is failing	104
SAS IOM status is downgraded	104
SAS IOM health is downgraded	104
Drives on compute sled are not visible	105
Storage configuration cannot be applied to SAS IOMs	105
Drives in OpenManage are not visible	105
iDRAC and OpenManage drive information do not match	105
The assignment mode of storage sled is unknown	105
Unable to access OME-Modular using Chassis Direct	105
Troubleshooting lead chassis failure	105
Recommended slot configurations for IOMs	106

Match case Limit results 1 per page

Replacing storage sleds

When you remove a storage sled from one slot and insert it into another slot on the chassis, the mapping on the new slot is used for the

storage sled. If you replace the storage sled with a brand new sled which does not have a service tag, the service tag and the mapping of

the sled that was present in the slot earlier, are applied. However, the storage sled firmware is not replaced automatically.

Updating enclosure firmware

You can update or rollback the storage enclosure firmware using the OME–Modular. Use the following methods to update the firmware:

Dell Update Package (DUP)

Catalog-based compliance method

NOTE:

The OME–Modular is inaccessible during the update process.

Updating the firmware using DUP

Download the DUP from

www.dell.com/support/drivers

On the OME–Modular web interface, go to

Devices

Storage

Select the storage sled on which you want to update the firmware.

Click

Update Firmware

Select the

Individual package

option and click

Browse

to go to the location where you have downloaded the DUP.

Wait for the comparison report, the supported components are displayed.

Select the required components and click

Update

to start the firmware update.

Go to the

Monitoring

Jobs

page to view the job status.

Updating the firmware using catalog-based compliance

On theOME–Modular web interface, go to

Devices

Storage

Select the storage sled on which you want to update the firmware.

Click

Update Firmware

Select the baseline and click

The Schedule Update page is displayed.

Select the

Schedule Update

options as required.

•

Update Now

—apply the firmware updates immediately.

•

Schedule Later

—schedule the firmware updates for a later date. Select the required date and time.

Downgrading storage enclosure firmware

Follow these steps to roll back the firmware for a storage enclosure:

On the OME–Modular web interface, go to

Devices

Storage

Select the system and click

View Details

Click

Rollback Firmware

Select the available version of the firmware and click

Confirm

to continue.

Managing SAS IOMs

The internal connection of the storage subsystem is called "Fabric C", which serves as a communication mode between compute sleds

and storage enclosures. The "Fabric C" is used for SAS of FC storage connectivity and includes a midplane. SAS IOMs allow creating

storage assignments in which you can map storage enclosure drives or whole storage enclosures to compute sleds. SAS IOMs provide

multi-path input out access for compute sleds to drive elements. The active module manages the SAS IOM and is responsible for all

inventory and storage assignments on the fabric.

Managing storage