Dell PowerEdge MX7000 EMC OpenManage Enterprise-Modular Edition Version 1.10.2 - Page 71
Restrictions and guidelines
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Table 18. Fabric topology Chassis Slot Chassis 1 A1 A2 Chassis 2 A1 A2 Chassis 3-10 A1 A2 You can also use Fabric B to create a second scalable fabric: Module MX9116n FSE MX7116n FEM MX7116n FEM MX9116n FSE MX7116n FEM MX7116n FEM Restrictions and guidelines The following restrictions and guidelines are applicable when building a scalable fabric: • Mixing switch types in the same fabric is not supported. For example: MX9116n in slot A1 and MX5108n in slot A2 • Mixing switch types across fabrics is supported. For example: MX9116n in slots A1& A2 and MX5108n in slots B1 & B2 • All FSE and FEM IOMs in a scalable fabric must be in the same OME-Modular MCM group. FEMs in a chassis in MCM group 1 cannot be connected to FSEs in a chassis in MCM group 2. The following restrictions are applicable when implementing a scalable fabric in both fabric slot A and fabric slot B: • IOM placement for each scalable fabric must be the same within the same chassis. For example, if the FSE for the first scalable fabric is in Slot A1, then the second FSE must be in slot B1 in the same chassis, and so on. MX Scalable Fabric architecture 71