Dell PowerVault TL4000 Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS - User's G - Page 19
Configuring the iSCSI bridge - default password
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Configuring the iSCSI bridge 7. Configuring the iSCSI bridge Before the iSCSI bridge can be used on the network for the first time, it is necessary to configure a number of IP parameters. To make this as easy as possible, the iSCSI bridge has a Graphical User Interface (GUI) that can be accessed via any web browser. 7.1 Initial set up Connect the iSCSI bridge to the Dell PowerVault drives and the network as described in the previous sections and power up the unit. From your web browser, connect to the iSCSI bridge using the IP-address 10.10.10.10 Depending on how the network parameters are set on the machine you are using to access the iSCSI bridge, it may be necessary to change your network setting on your computer for the initial set up (see Appendix A and B for further help). Once you have connected to the GUI you will see the entry page shown below. Figure 13 Login page Enter the default password - admin. If the password is entered incorrectly, the following screen will be displayed. Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User's Guide Rev.C Page 17