Dell PowerVault TL4000 Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS - User's G - Page 4
Read this first
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Read this first 1. Read this first Contacting Dell Note: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some service may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Visit http://support.dell.com 2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page. 3. Click Contact Us on the left side of the page. Note: Toll-free numbers are for use within the country for which they are listed. 4. Select the appropriate service or support link based on your needs. 5. Choose the method of contacting Dell that is convenient for you. Before you start There are a number of additional pieces of equipment you will require for the successful installation of your bridge. Ethernet Cable You will require a good quality cable of suitable length to go between your network access point and the iSCSI bridge. This should be marked as certified to Cat 5e and have a RJ45 style connector at the bridge end. SAS Cable The TL24iSCSIxSAS 1 Gb iSCSI bridge uses a "Mini SAS" style connector, or more commonly known as iPASS connector, with 2 SAS connections per Port. You will require a SAS cable that supports this connector at the bridge end and the type of connect your peripheral device supports at the other. If you are in any doubt, please contact your reseller for assistance. Page 2 Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User's Guide Rev.C