Dell XPS 700 Jet Black Owner's Manual - Page 117
Processor Airflow Shroud, Removing the Processor Airflow Shroud
View all Dell XPS 700 Jet Black manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Processor Airflow Shroud CAUTION: Before you perform this procedure, follow the safety instructions located in the Product Information Guide. Removing the Processor Airflow Shroud 1 Follow the procedures in "Before You Begin" on page 75. 2 Remove the computer cover (see "Removing the Computer Cover" on page 76). CAUTION: The processor heat sink can get very hot during normal operation. Be sure that the heat sink has had sufficient time to cool before you touch it. 3 Loose the two captive screws on the processor airflow shroud, and then rotate the shroud back, away from the fan. 1 2 1 processor airflow shroud 2 captive screws (2) NOTICE: The processor heat sink is attached to the processor airflow shroud. When you remove the airflow shroud, lay it upside down or on its side to avoid damaging the heatsink thermal interface. 4 Lift the processor airflow shroud out of the computer, and then set it aside. Removing and Installing Parts 119