Dell XPS 700 Jet Black Owner's Manual - Page 90
Press the release tab if present on the system board connector as you grasp the card by its top
View all Dell XPS 700 Jet Black manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
5 Disconnect any cables connected to the card. 6 Press down the tab on the top of the card retainer at the appropriate card slot and pivot the card retainer back through the chassis wall. 1 2 3 4 1 release tab 4 fan bracket 2 card retainer 3 alignment guide 7 Press the release tab (if present) on the system board connector as you grasp the card by its top corners, and then ease the card out of the connector. NOTE: If the card is full-length, press the release tab on the end of the alignment guides on the fan bracket. 92 Removing and Installing Parts
92
Removing and Installing Parts
5
Disconnect any cables connected to the card.
6
Press down the tab on the top of the card retainer at the appropriate card slot and pivot the card
retainer back through the chassis wall.
7
Press the release tab (if present) on the system board connector as you grasp the card by its top corners,
and then ease the card out of the connector.
NOTE:
If the card is full-length, press the release tab on the end of the alignment guides on the fan bracket.
1
release tab
2
card retainer
3
alignment guide
4
fan bracket
1
2
3
4