Dell XPS 700 Jet Black Owner's Manual - Page 138
Start, Turn Off Computer, Turn off, After the Microsoft
View all Dell XPS 700 Jet Black manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
3 Locate the 2-pin password jumper (PASSWORD) on the system board (see "System Board Components" on page 79), then remove the jumper plug and set the plug aside. 4 Close the computer cover. 5 Connect your keyboard and mouse, then connect your computer and monitor to electrical outlets and turn them on. 6 After the Microsoft® Windows® desktop appears on your computer, turn the computer off: a Click Start, then click Turn Off Computer. b In the Turn off computer window, click Turn off. The computer performs a shutdown of the operating system, and then turns off. NOTE: Ensure that the computer is off and not in a power management mode. If you cannot shut down the computer using the operating system, press and hold the power button for 4 seconds. 7 Disconnect the keyboard and mouse, then disconnect the computer and monitor from their electrical outlets. 8 Press the power button on the computer to ground the system board. 9 Open the computer cover (see "Removing the Computer Cover" on page 76). NOTICE: The password jumper plug must be reinstalled on the password jumper pins in order to enable the password feature. 10 Locate the 2-pin password jumper on the system board (see "System Board Components" on page 79), and then reinstall the jumper plug to enable the password feature. 11 Replace the computer cover (see "Replacing the Computer Cover" on page 125). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 12 Connect your computer and devices to electrical outlets, and then turn them on. NOTE: In system setup (see "Entering System Setup" on page 132), both system and administrator password options appear as Not Set. The password feature is enabled but a password is not assigned. 140 Appendix