Dell XPS 700 Jet Black Owner's Manual - Page 94
Network Adapter and Sound Card Settings, Integrated Audio Controller
View all Dell XPS 700 Jet Black manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
1 2 3 1 graphics card bridge (not 2 present on some dual graphics card configurations) power connectors (2) 3 dual-PCI Express graphics cards NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer. 12 If present, lower the card retention device that lays over the installed cards and snap it into place. 13 Replace the computer cover (see "Replacing the Computer Cover" on page 125), reconnect the computer and devices to electrical outlets, and then turn them on. Network Adapter and Sound Card Settings If you installed a sound card: 1 Enter system setup (see "Entering System Setup" on page 132), select Integrated Audio Controller, and then change the setting to Off. 2 Connect external audio devices to the sound card connectors. Do not connect external audio devices to the microphone, speaker/headphone, or line-in connectors on the back panel. If you removed a sound card: 1 Enter system setup (see "Entering System Setup" on page 132), select Integrated Audio Controller, and then change the setting to On. 2 Connect external audio devices to the audio connectors on the back panel of the computer. 96 Removing and Installing Parts