Dewalt DXGNR5700 Instruction Manual - Page 12
Connection Plugs, Hour Meter if equipped, VAC, 20 Amp, GFCI Duplex Receptacle
View all Dewalt DXGNR5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operation 2 3 22 1 9 18 3 7000 - Canada (CSA listed) 20 21 003606 When the hour meter is in flash alert mode, the maintenance message will alternate with elapsed time in hours and tenths. The hours will flash four times, then alternate with the maintenance message four times until the meter automatically resets. • 100 hours - CHG OIL - Oil Change Interval (Every 100 hrs) • 200 hours - SVC - Service Air Filter (Every 200 hrs) NOTICE: The hour glass icon will flash when the engine is running. This signifies the meter is recording hours of operation. 16 12 17 6 5 15 11 14 4 7 0000.0 19 000786 10 Connection Plugs 000205 120 VAC, 20 Amp, GFCI Duplex Receptacle This is a 120 Volt outlet protected against overload by a 20 Amp push-to-reset circuit breaker. Use each socket to power 120 Volt AC, single phase, 60 Hz electrical loads requiring up to a combined 2400 watts (2.4 kW) or 20 Amps of current. Use only high quality, well-insulated, 3wire grounded cord sets rated for 125 Volts at 20 Amps (or greater). Keep extension cords as short as possible to prevent voltage drop and possible overheating of wires. 13 000788 8 Hour Meter (if equipped) The Hour Meter tracks hours of operation for scheduled maintenance. • The CHG OIL display will illuminate every 100 hours. The message will flash one hour before and one hour after each 100 hour interval, providing a two hour window to perform service. • The SVC display will illuminate every 100 hours. The mes- sage will flash one hour before and one hour after each 200 hour interval providing a two hour window to perform service. 8 000203 Owner's Manual for Portable Generator